CONTACTS 

SUBJECTS
Stop Error
DOS Apps Not Running Correctly, SDS, MEM, etc, not running
Disk Needs to be Checked for Consistency
Directory Option Missing from OEM CD to Install OS
SDS Reports Slow on C13

0807 -    ..
0808 - Summary/Objective
0809 -
080901 - Follow up ref SDS 4 0001.
080902 -
080903 - Windows 2000 on C13 failed this morning, ref SDS 0 ML5J, and reported
080904 - erratic errors running applications using DOS window, including SDS.
080905 - ref SDS 0 SE6L  Reversed changes made last night, ref SDS 0 QT5L, and
080906 - changes to power management made yesterday. ref SDS 0 HT6W  W2K gave a
080907 - report of possible virus. ref SDS 0 8R7L  Ran Norton virus protection;
080908 - it reported no viruses on c13.  ref SDS 0 B83S  BIOS and driver for
080909 - IDE hard drive were upgaded by files from Intel; this did not improve
080910 - performance. ref SDS 0 N3RY  Later in the day, blue screen Stop
080911 - failures began occurring regularly.  PC Doctor recommended running w2k
080912 - setup to replace defective files. ref SDS 0 QW4O  This did not work,
080913 - so tried clean install by formatting I: drive where w2k is installed.
080914 - Did this many times throughout the night. ref SDS 0 M29O  Cleared blue
080915 - screen Stop problems, but only provided 599K of RAM for SDS, rather
080916 - than 634. ref SDS 0 Y2WK  Tried different ways to install w2k, and
080917 - discovered that the Advanced option for designating the partition to
080918 - install w2k is not provided when installing from the w2k CD.
080919 - ref SDS 0 ST9L
080920 -
080921 -    [On 010207 called Microsoft, they say OEM CD may have defects,
080922 -    sending full version to clear performance problems. ref SDS 7 B46N
080923 -
080924 -    [On 010214 installed full version of w2k, did not solve problems.
080925 -    ref SDS 8 0001
080926 -
080927 -
080928 -
080929 -
080930 -
080931 -  ..
0810 -
0811 -
0812 - Progress
0813 -
081301 -  ..
081302 - W2K Failed on Stop Error Required Clean Install
081303 -
081304 - Follow up ref SDS 4 1J7L, ref SDS 2 GE7H.
081305 -
081306 - Early this morning encountered a blue screen Stop report that w2k
081307 - crashed, evidently due to a conflict between power management in the
081308 - BIOS and w2k, but not really sure, per below. ref SDS 0 HT6W  The
081309 - initial blue screen Stop was cleared by botting the computer.  It came
081310 - up normally, but when DOS apps were called, an error message appeared.
081311 - The message had a choice to launch the application; when this was
081312 - tried, the application seemed to run normally. ref SDS 0 SE6L  Later DOS Apps are not
081313 - failed to run correctly.  For example, I am writing this paragraph at
081314 - the end of the day to sum up, and the system is suddenly switching
081315 - between caps and standard case, so we have a severe problem.  Through
081316 - the course of the day, downloaded drivers from Intel, which hopefully
081317 - enable w2k to work better with the latest Intel hardware. This has not
081318 - eliminated the DOS app problem, nor has it ended the poor performance
081319 - of the overall system.
081320 - ..
081321 - The initial blue screen Stop failure occured after the following
081322 - sequence about 0641....
081323 -
081324 -    I pressed the shift key, and the screen came up.
081325 -
081326 -    I clicked on the task bar for the DSL application, and this
081327 -    launched the Pac Bell NTS EnterNet 300 program for connecting to
081328 -    the Internet.
081329 -
081330 -    After this step, the screen went blue, and the following was
081331 -    entered in VGA plain text....
081332 -
081333 -       Stop 0x00000001 (0x0004010, 0x00000002,0x00000000, 0xBFF2046B)
081334 -       DRIVER_IRQL_NOT_LESS_OR_EQUAL
081335 -
081336 -       ***Address BFF2046B base at BFF160001
081337 -       ..
081338 -       Date Stamp 3919b393-NDIS.sys
081339 -
081340 -       If this is the first time you have seen this Stop error screen,
081341 -       restart your computer.  If this screen appears again, follow
081342 -       these steps.
081343 -
081344 -       Check to make sure any new hardware or software is properly
081345 -       installed.  If this is a new installation, ask your hardward or
081346 -       software manufacturer for any Windows 2000 updates you might
081347 -       need.
081348 -
081349 -       If problems continue, disable or remove any newly installed
081350 -       hardware or software.  Disalbe BIOS memory options such as
081351 -       caching or shadowing.  check your hard drive to make sure it is
081352 -       properly configured and terminated.  If you need to use Safe
081353 -       Mode to remove or disable components, restart your computer,
081354 -       press F8 to select Advanced Start Up Options, and then select
081355 -       Safe Mode.
081356 -       ..
081357 -       Refer to your Getting Started manual for more information
081358 -       on trouble shooting Stop errors.
081359 -
081360 -                         ***********
081361 -
081362 - The only program obtained recently is Diskeeper.  It was purchased and
081363 - installed yesterday, 010205, and it was run to defragment drives d and
081364 - g, ref SDS 3 OJ3O, to try and solve the problem of the c13 failing to
081365 - perform faster than c12, which is much slower computer, also, reported
081366 - yesterday. ref SDS 4 0001
081367 - ..
081368 - On 010205, last night, made some changes to improve performance
081369 - of the disk. ref SDS 4 0001
081370 -
081371 -     As a result of the above problem, changed diskperf -yd back to
081372 -     default setting. ref SDS 4 LJ8I
081373 -
081374 - As a result of getting this message, I pressed the re-start button on
081375 - the computer.
081376 - ..
081377 - The normal boot sequence occurred, except there was a
081378 - message....
081379 -
081380 -
081381 -            One of your disks needs to be checked for
081382 -            consistency.
081383 -
081384 - The system continued and completed normal boot sequence.
081385 -
081386 -  ..
081387 - At the desktop, clicked on SDS to report the problems that occurred.
081388 -
081389 - Got following message....
081390 -
081391 -      16 bit MS-DOS Subsystem   (Error) for SDS
081392 -
081393 -      Schedule Diary System
081394 -      SYSTEM\CurrentControlSet\Control\VirtualDevideDrivers. VDD.
081395 -      Virtual Devide Driver format in the registry is invalid.  Choose
081396 -      "Close to terminate the application.
081397 -
081398 -                      Close       Ignore
081399 -
081400 - ..
081401 - I clicked close, and booted the computer.  Launched Safe Mode,
081402 - and tried opening SDS.
081403 -
081404 - Got same error message.
081405 -
081406 - Closed Safe Mode and booted into normal mode.
081407 -
081408 - Launched DOS.
081409 -
081410 -     DOS comes up normally without an error message.
081411 -
081412 -     MEM comand produces the same error as above for launching SDS.
081413 -
081414 -     DIR, DEL, COPY comands do not cause error message.
081415 - ..
081416 - Tried ignoring warning message and opening SDS.
081417 - ..
081418 - It seems to run okay.
081419 -
081420 -
081421 -
081422 -
0815 -
0816 -
0817 - 0702 called Morris
0818 -
081801 - He suggested trying other DOS commands.
081802 -
081803 - Tried....
081804 -
081805 -      C>e fun
081806 -
081807 - ..
081808 - This opened the editor without the error message, and similarly,
081809 - calling sds.bat, ran the SDS program without the error message.
081810 -
081811 - However, trying thse same commands later caused the same error
081812 - message. ref SDS 0 ML5J
081813 -
081814 - So far, "mem" is the only DOS command that returns the error message.
081815 -
081816 -
081817 -
081818 -
0819 -
0820 -
0821 - 0817
0822 -   ..
082201 - After talking to Morris, continued working with c13 attempting
082202 - to clear problems with DOS applications, per above. ref SDS 0 SE6L
082203 - ..
082204 - Upgraded Intel BIOS and drivers, per below. ref SDS 0 GP2S
082205 - Re-set configuration on standby and hibernation mode, ref SDS 0 HT6W,
082206 - and checked the system for virus problems. ref SDS 0 B83S
082207 -
082208 - None of this cleared DOS app problems, nor improved substandard
082209 - performance, reported on 010202. ref SDS 2 QL5K
082210 -
082211 -  ..
082212 -
082213 - Blue screen Stop notices began occurring regularly.
082214 -
082215 -
0823 -
0824 -
0825 - 1345
0826 -
082601 - Called PC Doctor and spoke to Raul, reported in another record today.
082602 - ref SDS 5 ML5J The OEM recommended running w2k setup in upgrade mode
082603 - to clear w2k defects, so we do not lose the value of the time invested
082604 - for configuration on 010202. ref SDS 1 0001
082605 -
082606 - While talking to Raul at PC Doctor, ran.....
082607 -
082608 -
082609 -                      g: 00 w2k setup
082610 -
082611 - ..
082612 - During installation, we got an error message that a virus was
082613 - detected in the w2k installation code.  The virus was not identified,
082614 - and had no size associated.  This indicates the system merely
082615 - encountered a corrupt file, and reported it as a virus.
082616 -
082617 - Virus scan run minutes before running the w2k setup program, reported
082618 - no viruses, per below. ref SDS 0 B83S
082619 -
082620 - W2K installed, and maintained original setup, but it did not clear the
082621 - errors for DOS, per above, ref SDS 0 SE6L, nor correct performance
082622 - defects.  OEM recommended clean install of w2k on i: drive, leaving
082623 - other software in place, to minimize configuration.
082624 -
082625 -    [...see report in another record. ref SDS 5 ML5J
082626 -
082627 -
082628 -  ..
0827 -
0828 -
0829 - 1558
0830 -
083001 - Continued struggeling with c13.  Blue screen crashes increased in
083002 - frequency.
083003 -
083004 -
083005 -
083006 -
083007 -
0831 -

SUBJECTS
Disk Format FAT32
W2K Upgrade Install Fix Stop Error Causing System Failure

1205 -
120501 -  ..
1206 -
1207 -
1208 - 2152
1209 -
120901 - Did clean install of w2k recommended by OEM, by formatting the i:
120902 - drive where w2k is installed.
120903 -
120904 - W2K setup was used from OEM program code on g: drive, transferred on
120905 - 010202, ref SDS 2 K3SG,
120906 -
120907 - Formatted I: drive.
120908 -
120909 -    Since the efficient installation method using fdisk for prior
120910 -    versions is not on the OEM CD, had to first remove the I:
120911 -    partition, then identify it again, then format the drive.
120912 -    ..
120913 -    Selected FAT32, which was used on c11, and was the original
120914 -    configuration for c13.
120915 -
120916 -       On 010205 purchased Diskeeper to defragment the drives, and saw
120917 -       report in readme file that Diskeeper has added a lot of new
120918 -       features to solve problems people are reporting from using the
120919 -       W2K advanced NTFS format. ref SDS 3 EH8I
120920 -
120921 -
120922 -
1210 -
1211 -

SUBJECTS
RAM DOSX Not Loading High 599 RAM Instead of 634
Directory Install OS Advanced Option Missing from OEM CD

1605 - 2246
1606 -
160601 -  ..
160602 - Forgot to Designate Directory for OS, Start Over
160603 -
160604 - Had to start over because forgot to designate the directory for the
160605 - operating system.
160606 -
160607 - Ran same procedure using the w2k code on g:
160608 -
160609 - There is an initial screen with an "Advanced" option for designating
160610 - the directory for the operating system.
160611 -
160612 - Specified.....
160613 -
160614 -                    i: 00 02
160615 -
160616 -
160617 -
1607 -
1608 - 0154
1609 -
160901 -  ..
160902 - RAM Only 599K Instead of 634K
160903 -
160904 - Installation completed successfully.
160905 -
160906 - Testing showed this installation cleared the system messages that
160907 - reported DOS apps were not running correctly, reported above.
160908 - ref SDS 0 SE6L
160909 -
160910 - Began configuring the system and noticed the performance defect was
160911 - not corrected, and a new problem had occurred.
160912 -
160913 - DOS was only reporting 599K of RAM, rather than 634 reported when the
160914 - system was received from the OEM on 010202. ref SDS 2 QL5K
160915 - ..
160916 - This indicated the installation was incorrect, since all other
160917 - factors were the same.
160918 -
160919 -     [On 010207 reported problem to Microsoft. ref SDS 7 YX7N
160920 -
160921 -
160922 -
160923 -
160924 -
1610 -
1611 -
1612 - 0412
1613 -
161301 - Installed w2k again, this time using the OEM's CD in order to ensure
161302 - the exact installation would result.
161303 -
161304 -
1614 -
1615 -
1616 - 0437
1617 -   ..
161701 - Did not remember designating target drive for OS, so started
161702 - over.
161703 -
161704 -
1618 -
1619 -
1620 - 0448
1621 -
162101 - Completed installation, and found the directory for the OS still had
162102 - not been identified, so assumed this had been overlooked a 2nd time
162103 - due to fatigue.
162104 -
162105 -
162106 -  ..
162107 - Directory Feature in Advanced Menu Missing from OEM CD
162108 -
162109 -
1622 -
1623 -
1624 - 0623
1625 -
162501 - Installed w2K again using code on g: drive and noticed the "Advanced"
162502 - option occurs in the beginning of the installation process.
162503 -
162504 - Stopped this and ran setup on the CD, and noticed the Advanced option
162505 - does not appear.
162506 -
162507 - This indicates a difference between installing the code from the CD
162508 - and installing from setup code on the hard drive.
162509 - ..
162510 - There is no explanation of the difference in Microsoft
162511 - documents.
162512 -
162513 -     [On 010207 continued installation after calling Microsoft.
162514 -     ref SDS 7 0001
162515 -
162516 -
162517 -
162518 -
162519 -
1626 -

SUBJECTS
Performance Slower for SDS Reports than C11
Upgrade BIOS
BIOS Upgraded P05 to P08

2006 - 1749
2007 -
200701 -  ..
200702 - BIOS Upgrade from Intel
200703 -
200704 - Follow up ref SDS 6 RH6O, ref SDS 2 MT2R.
200705 -
200706 - To help solve the system prformance problem reported on 010205,
200707 - ref SDS 4 0001, will try implementing information from Intel in
200708 - another record today, ref SDS 6 RH6O, on updating system board
200709 - drivers.....
200710 -
200711 - Intel's web site.....
200712 -
200713 -    http://support.intel.com/support/motherboards/desktop/d850gb/tti012.htm
200714 -
200715 - ...says....
200716 -       ..
200717 -       Some versions of the Intel Desktop Board D850GB shipped
200718 -       with a BIOS version earlier than P05. Intel recommends using
200719 -       BIOS P06 or later on the Intel Desktop Board D850GB to ensure
200720 -       that you have the latest BIOS update.
200721 -
200722 - ....accordingly, we have a downlevel version of the BIOS, reported on
200723 - 010202. ref SDS 2 MT2R
200724 -
200725 - Will download and upgrade BIOS.
200726 -
200727 -
200728 -      http://developer.intel.com/design/motherbd/gb/gb_bios.htm
200729 -
200730 -
200731 - Current version of BIOS is.....
200732 -
200733 -               ..
200734 -               GB85010A.86A.0053.P08
200735 -
200736 -
200737 - Instructions are....
200738 -
200739 -     1.  Download the BIOS update .exe file from developer.intel.com to
200740 -         your system.
200741 -
200742 -         Where to put it....
200743 -
200744 -
200745 -                g: 00 D850GB BIOSP08
200746 -
200747 -
200748 -     2.  Double-click on the self-extracting executable.
200749 -         ..
200750 -     3.  Three button clicks take you through the InstallShield
200751 -         wizard.
200752 -
200753 -     4.  Express BIOS Update automatically shuts down your system,
200754 -         updates the BIOS, and reboots your system.
200755 -
200756 - This is similar to the operation for c12 on 000615. ref SDS 1 5040
200757 -
200758 - Ran these instructions, and successfully upgraded the BIOS.
200759 -
200760 -
200761 -
200762 -
200763 -
2008 -
2009 -

SUBJECTS
Performance Slower for SDS Reports than C11

2204 -
2205 - 1825
2206 -
220601 -  ..
220602 - Updated Drivers for Intel D850GB System Main Board
220603 -
220604 - Per recommendation of Intel later today, ref SDS 6 9W5J, logged onto
220605 - Intel web location and downloaded drivers for the Intel D850GB board.
220606 -
220607 -     http://developer.intel.com/design/motherbd/gb/gb_drive.htm
220608 -
220609 -        [On 010206 Intel called for evaluation of Technical Support on
220610 -        this issue. ref SDS 9 KH3W
220611 -
220612 - Instructions to update drivers for Intel D850GB......
220613 -
220614 -     Extensive instructions on Intel's web site, seem to be out of
220615 -     date, because they didn't work. All that is necessary is to double
220616 -     click on the downloaded files and follow online instructions.
220617 -
220618 -
220619 -
220620 -  ..
220621 -     D850GB Desktop Board Driver Updates
220622 -
220623 -     Current Chipset Drivers for the D850GB Desktop
220624 -     Board:
220625 -
220626 -     •  82801BA ICH2 INF Utility for Windows* 98, Windows 98SEdows
220627 -        ME, and Windows 2000. Version 2.60.001 PC 99 Certified
220628 -
220629 -        Important!! For initial operating system installations,
220630 -
220631 -        Load this INF Utility first!!
220632 -
220633 -        NOTE: The INF files are used by the operating system to
220634 -        identify the devices found in the platform and enable the
220635 -        appropriate driver to load on the device. The INF utility
220636 -        should be run before other drivers are installed.
220637 -        ..
220638 -        Downloaded....
220639 -
220640 -                            INFINST_ENU.EXE
220641 -
220642 -
220643 -        ....Size: 1,718,596 Date: November 13, 2000
220644 -
220645 -        Put the installation file in....
220646 -
220647 -
220648 -                g: 00 D850GB INF
220649 -
220650 -
220651 -        Per instructions above, will try executing in Start Run...
220652 -
220653 -
220654 -                g:\00\D850GB\INF\INFINST_ENU.EXE -d
220655 -
220656 - ..
220657 - This seems to be successful.
220658 -
220659 -        It appears, however, that the drivers can now be installed
220660 -        simply by double clicking on the downloaded file.  The
220661 -        installation program provides a pause so the user can specify
220662 -        where to put the installation.
220663 -
220664 -        For this particular driver, it appears there is no specific
220665 -        directory where code is stored.  A directory is created...
220666 -
220667 -             I:\Program Files\Intel\InfInst
220668 -
220669 -        ...but all it has is a Temp directory that is empty, and a
220670 -        readme.txt file, that explains the registry is updated.
220671 -
220672 -
2207 -
2208 -

SUBJECTS
Performance Slower for SDS Reports than C11
IDE Driver 82801BA ICH2 for Hard Drive
Slow Performance Running SDS Reports

260501 -
260502 -  ..
260503 -
260504 -     •  82801BA ICH2 IDE-Storage Driver for Windows 98, WindowE,
260505 -        Windows NT 4.0, Windows 2000, and Windows ME. Version 603,
260506 -        build 008 PC 99 Certified
260507 -
260508 -        Hopefully this will help sovle the performance issue reported
260509 -        above. ref SDS 0 8RSF
260510 -
260511 -            ...turned out not to have an noticable effect on our
260512 -            problem.
260513 -
260514 -        Downloaded....
260515 -
260516 -                            IATA_CD.EXE
260517 -
260518 -
260519 -        ....Size: 4,760,598 Date: November 13, 2000
260520 -        ..
260521 -        Put the installation file in....
260522 -
260523 -
260524 -                g:\00\D850GB\IDE\IATA_CD.EXE
260525 -
260526 -
260527 -        Double clicked on the file.
260528 -
260529 -        Installation instructions ask for destination directory...
260530 -
260531 -
260532 -                h: 00 intel UASD
260533 -
260534 -
260535 -        Installation put the stuff in this directory, but created
260536 -        another directory....
260537 -
260538 -
260539 -                h: 00 intel Ultra ATA Storage Driver
260540 -
260541 -        ..
260542 -        This directory is empty.
260543 -
260544 -        The directory where the files were extracted, has a file...
260545 -
260546 -
260547 -                h:\00\intel\UASD\intelata.exe
260548 -
260549 -
260550 -        Tried running above .exe file, and it does not set up any
260551 -        further file or directory systems, as indicated, ref SDS 0 6P9L, by the
260552 -        installation instructions in para 5 above.
260553 -
260554 -  ..
260555 -        intelata.exe
260556 -
260557 -             This shows a lot of diagnostics about system storage,
260558 -             including the serial number of the hard drive that was
260559 -             missing from the record on 010202.
260560 -
260561 -
260562 - There is a readme file that explains this driver....
260563 -
260564 -        The Intel Ultra ATA Storage Driver automatically enables fast
260565 -        Ultra ATA transfers for a variety of ATA/ATAPI mass storage
260566 -        devices such as hard disk drives and C D-ROMs.  This driver has
260567 -        been architected to take advantage of the latest Intel Ultra
260568 -        ATA controller features to improve both storage subsystem
260569 -        performance and overall system performance.  Driver
260570 -        installation is fully automated for Microsof Windows* 98,
260571 -        Microsoft* Windows* NT* 4.0, and Microsoft* Windows* 2000.
260572 -        ref OF 1 PC3M
260573 - ..
260574 - The readme file further says to.....
260575 -
260576 -        Run 'Start', 'Settings', then 'ControlPanel'
260577 -        Double-click 'System' Control Panel Application
260578 -        Select the 'Hardware' tab
260579 -        Select 'Device Manager' button
260580 -        Expand the 'IDE ATA/ATAPI Controllers' entry
260581 -        Select the 'Intel 82801XX Ultra ATA Controller' listed,
260582 -        where XX in 82801XX represents the controller identified by the
260583 -        'System Requirements' section of this document.
260584 -        Select the 'Properties' button
260585 -        Select the 'Driver' tab
260586 -        Select the 'Driver File Details' button
260587 -        'INTELATA.SYS' should be displayed
260588 - ..
260589 - Turns out we don't have to do anything.  This is just saying how
260590 - to show the driver is installed.
260591 -
260592 -
260593 -             i: 00 32 system32 drivers INTELATA.SYS
260594 - ..
260595 - Verified the driver is installed along with two others...
260596 -
260597 -             i: 00 32 system32 drivers ideBd.sys
260598 -             i: 00 32 system32 IATA2000.dll
260599 -
260600 -
260601 -         ..
260602 -        Performance Not Improved by Upgraded BIOS and IDE HD Driver
260603 -
260604 -        The BIOS was upgraded, per above. ref SDS 0 GP2S  Then the INF
260605 -        driver was installed, ref SDS 0 RF6I, and then the driver for
260606 -        the IDE hard drive controller was installed. ref SDS 0 N95K
260607 -
260608 -        After making these changes, tested performance and found there
260609 -        is no improvement.  Have same problem
260610 -        reported on 010202.
260611 -
260612 -           [On 010206 Intel called for evaluation of Technical Support
260613 -           on this issue. ref SDS 9 KH3W
260614 -
260615 -
260616 -
260617 -     ..
260618 -    Intel Audio Drivers Not Installed
260619 -
260620 -    Current Integrated Audio Drivers for the D850GB
260621 -    Desktop Board:
260622 -
260623 -      ADI 1881 SoundMAX2 Integrated Audio Driver for Windows 98 SE,
260624 -      Windows 2000, and Windows ME. Version 5.12.01.3013 PC 99
260625 -      Certified
260626 -
260627 -                        GB_WDM3013_SM2.EXE
260628 -
260629 -      Size: 18,991,147 Date: February 1, 2001
260630 -
260631 - Decided not to install above driver, because it sounds like making
260632 - making music and movies sound better, and they already sound okay.
260633 -
260634 -  ..
260635 -
260636 -      ADI 1881 Basic Integrated Audio Driver for Windows 98 SE, Windows
260637 -      2000, and Windows ME. Version 5.12.01.3013 PC 99 Certified
260638 -
260639 -                           GB_WDM3013.EXE
260640 -
260641 -      Size: 4,276,564 Date: February 1, 2001
260642 -
260643 - Installed the above to help ensure compatibility and that drivers are
260644 - not causing performance problems.
260645 -
260646 -      Downloaded to...
260647 -
260648 -
260649 -                h: 00 intel AUDIO
260650 -
260651 -        ..
260652 -        The directory where the files were extracted, has a
260653 -        file...
260654 -
260655 -
260656 -                h:\00\intel\AUDIO\GB_WDM3013.EXE -d
260657 -
260658 -
260659 - Tried running this at Start Run.
260660 -
260661 - It crashed.
260662 -
260663 - Double clicked on the file in the directory, and it turned out to be
260664 - an unzip operation.
260665 -
260666 - Unzipped to the directory....
260667 -
260668 -
260669 -                h:\00\intel\AUDIO
260670 -
260671 - ..
260672 - This has a setup.exe program.
260673 -
260674 - Ran setup, and it asks where to install the stuff.
260675 -
260676 -
260677 -                h:\00\intel\audio
260678 -
260679 -
260680 - Actually, got an error message saying device not detected, indicating
260681 - this is not needed.
260682 -
260683 -
260684 -
260685 -
2607 -

SUBJECTS
System Standby Save Power
Hibernation

2805 -
280501 -  ..
280502 - Hibernation and Standby Modes Set in W2K
280503 -
280504 - Last night after talking to Morris about performance problems on c13,
280505 - I set up power management, so the monitor will shut off after 10
280506 - minutes of non-use, and the disk drives will stop after 20 minutes.
280507 -
280508 - On another tab for Advanced, there is a hibernation mode, that I set.
280509 -
280510 - This morning, as a result of the problem encountered with the Stop
280511 - screen, I removed these settings.
280512 -
280513 - BIOS entered by pressing F2 during the power up sequence, shows power
280514 - management has standby set to execute in 20 minutes.
280515 - ..
280516 - In a call later today, Intel disclosed that it has software
280517 - upgrades for improving power management compatibility between the
280518 - Intel BIOS and w2k, in order to avoid conflicts that occurred this
280519 - morning. ref SDS 6 HT6W
280520 -
280521 - Actually, I think for now will try to just ignore this, and not set
280522 - up hibernation and standby in w2k.
280523 -
280524 -
280525 -
280526 -
280527 -
280528 -
280529 -
280530 -
2806 -

SUBJECTS
Virus Protection Norton
Virus Protection Program, Norton
Updated Viruse Inventory
C13 Showed No Viruses

3207 -
320701 -  ..
320702 - Virus Protection
320703 -
320704 - Follow up ref SDS 2 4AYE.
320705 -
320706 - As a result of problems experienced the past few day, updated Norton
320707 - virus protection definitions, using the online system that is
320708 - launched from within the Norton virus protection program under Start
320709 - Programs.
320710 -
320711 - After updating definitions, ran Virus scan on c13.  No virus problems
320712 - were found.
320713 -
320714 -
320715 -
320716 -
320717 -
320718 -
3208 -