CONTACTS 
0201 - Computown                            415 956 8696 fax 5548
020101 - Mr. Bryson NLN; Technical Support Rep
020102 - Service Department =415 982 8324

SUBJECTS
CPU Fan Not running correctly
Chasis Fan Speed xxx RPM [Err], 990825

0504 -    ..
0505 - Summary/Objective
0506 -
050601 - Follow up ref SDS 27 0000, ref SDS 25 0000.
050602 -
050603 -
050604 - Chasis Fan Speed xxxRPM [Err] on Start up
050605 -
050606 - Follow up ref SDS 27 9430, ref SDS 25 8568.
050607 -
050608 - Got two more reports when I booted the system today...
050609 -
050610 -    Hardware monitor found an error, enter Power Management setup for
050611 -    details.
050612 -
050613 - Pressed DEL to enter system setup.
050614 -
050615 - Opened Power Management Setup, and noticed following error report...
050616 -
050617 -
050618 -             Chasis Fan Speed xxxRPM [Err]
050619 -             CPU Fan Speed  1500 RPM
050620 -
050621 -
050622 - I closed the BIOS, since there is nothing to change.
050623 -
050624 - W98 did not boot normally, it reported same error message.
050625 -
050626 - I pressed F1 to continue the boot sequence.
050627 -
050628 - When W98 was online, I shut down completely.
050629 -
050630 - Powere up again, and the same error message occurred.
050631 -
050632 -             Chasis Fan Speed xxxRPM [Err]
050633 -             CPU Fan Speed  1700 RPM
050634 -
050635 -
050636 - I closed the BIOS, since there is nothing to change.
050637 -
050638 - W98 did not boot normally, it reported same error message.
050639 -
050640 - I pressed F1 to continue the boot sequence.
050641 -
050642 -    [The next day the CPU was turned off again, and this time it
050643 -    booted up without reporting an error message.]
050644 -
050645 -    [On 991113 replaced CPU fan and heat sink. ref SDS 28 0001]
050646 -
050647 -
050648 -
050649 -
050650 -
0507 -