CONTACTS 

SUBJECTS
Convert SDS Record to HTML
Links, Citations
Appearance, Headings
Filename Case Sensitive

0606 -    ..
0607 - Summary/Objective
0608 -
060801 - Follow up ref SDS 6 2227, ref SDS 5 4292.
060802 -
060803 - Changed Web pages to improve appearance and added ability to access
060804 - links to SDS records that have not been converted to the new anchor
060805 - method.
060806 -
060807 -     [Also today, added conversion of SDS linking on old records to use
060808 -     the "line" command. ref SDS 9 1058]
060809 -
060810 -     [Tested results of these changes. ref SDS 10 5765]
060811 -
060812 -     [On 980325 further tests revealed problems that were solved. ref
060813 -     SDS 26 2954]
060814 -
060815 -     [On 980526 modified this to use the regular full address and to
060816 -     include the Internet address. ref SDS 15 0000.]
060817 -
060818 -
060819 -
060820 -
060821 -  ..
0609 -
0610 -
0611 - Planning
0612 -
061201 - Per testing past few days, ref SDS 8 1149, we need to make following
061202 - improvements in 070405.
061203 -       ..
061204 -   1.  Change Executive Summary to just Summary and color it red.
061205 -       ref SDS 8 1980  Executive Summary is too heady and busy for
061206 -       every single record.
061207 -
061208 -          Did this below at ref SDS 0 1479.
061209 -       ..
061210 -   2.  Remove "Re" from SDS record description, per ref SDS 8
061211 -       2145.
061212 -
061213 -          Did this below at ref SDS 0 3111.
061214 -       ..
061215 -   3.  Allow users to open Web sites with line number parameters
061216 -       for SDS links that have not been converted to new system, so
061217 -       they start at the Executive Summary. ref SDS 8 1149
061218 -
061219 -       This requires entering in all records a standard link at the
061220 -       top of the record, and I think it will be on "Diary" field so
061221 -       the summary listing is in full view.
061222 -
061223 -          Did this below at ref SDS 0 2177.
061224 -
061225 -          [May have caused processing crashes, solved on 980325. ref
061226 -          SDS 26 3098]
061227 -
061228 -   4.  Eliminate line numbers for subject descriptions and use
061229 -       proportional fonts to improve appearance. ref SDS 8 1149
061230 -
061231 -          Did this below at ref SDS 0 0907.
061232 -       ..
061233 -   5.  Changed to Times Roman font for indented headings, e.g.,
061234 -       "Progress," "Discussion" and for logging time of interim tasks.
061235 -
061236 -          Did this below at, ref SDS 0 4478,
061237 -       ..
061238 -   5.  Need to figure out a way to stack multiple citations on
061239 -       the same line.  In the record of IBM's announcement on business
061240 -       intelligence, there are three cites on the same line.
061241 -
061242 -          See effort to solve this simply by making recl 360. ref SDS 0
061243 -          6027
061244 -
061245 -
061246 -
061247 -
0613 -
0614 -

SUBJECTS
Executive Summary
Line Numbers Use Standard ref to Diary Date
0000 Default Link to TOP

0906 -
090601 -  ..
090602 - 0704050 - Change Executive Summary to Just Summary
090603 -
090604 - Follow up ref SDS 6 3769.
090605 -
090606 - Line 930, ref OF 2 5813, -label 02, about 70 lines below, changed
090607 - Executive Summary, to just "Summary" for the Web page, per ref SDS 0
090608 - 1344.
090609 -
090610 - This reserves for special situations the use of Executive Summary.
090611 -
090612 - Added color of red to Summary.
090613 -
090614 -
090615 -
090616 -  ..
090617 - 0704050 - Add Standard Anchor to Diary Date in Summary
090618 -
090619 - Line 1000, ref OF 2 2463, -label nMemoF will add a standard anchor to
090620 - be used for links that still have the line number param rather than
090621 - the new format, per ref SDS 0 0883.
090622 -
090623 - This is the anchor for the change made today to the link conversion
090624 - code below. ref SDS 0 6525
090625 -
090626 -
090627 -         ..
090628 -        Add Standard Default "0000" Anchor at TOF
090629 -
090630 -        Line 930, ref OF 2 5763, -label 02, about 50 lines below,
090631 -        added another standard anchor "0000" above the document
090632 -        address line.
090633 -
090634 -        Decided against this location.
090635 -
090636 -        Line 1020, ref OF 2 2463, -label nMemoF Actually, I think I
090637 -        will try adding it to the same line as the "xx" line, since we
090638 -        want to put the reader so the maximum amount of Summary is
090639 -        visible.
090640 -
090641 -        No, decided to put "0000" on the xx anchor which is above the
090642 -        date line.
090643 -
090644 -             [On 980427 added similar call to default anchor for
090645 -             non-SDS records. ref SDS 12 3425]
090646 -
090647 -             [On 980501 added code for SDS records to open an "0000"
090648 -             anchor with the anchor at the tos. ref SDS 13 0429]
090649 -
090650 -             [On 980502 the code on 070405 is not processing the
090651 -             default anchor 0000 for non-SDS records. ref SDS 14 1623]
090652 -
090653 -
090654 -  ..
090655 - 0704050 - Eliminate "Re" from Record Description in Summary
090656 -
090657 - Line 1025, ref OF 2 3862, -label g01L, about, 15 lines below, removed
090658 - the "Re" from the record description, per ref SDS 0 2573.
090659 -
090660 -
090661 -
090662 -
0907 -

SUBJECTS
Links, Line Numbers Use Standard ref to Diary Date
SDS Records

1105 -
110501 -  ..
110502 - 070405 - Add Standard Link for Old Line Number Format
110503 -
110504 - Follow up ref SDS 6 2784, ref SDS 4 1224.
110505 -
110506 - Presently, when the code encounters a link that has a line number it
110507 - skips it.  Now I want to have it open the SDS record where the link is
110508 - located and place the reader at the Diary date line, which is a new
110509 - anchor created today, above. ref SDS 0 2177
110510 -
110511 -     This supplements work on 980311 that skips links that do not have
110512 -     a parameter. ref SDS 4 1224
110513 -
110514 -     Should probably add condition of no anchor param to the new
110515 -     feature created today.
110516 -
110517 -     Actually, there are so few of them that it is not worth the
110518 -     effort.
110519 -
110520 - Line 1480, ref OF 2 1651, -label ref2, about 60 lines below, we have
110521 - to check for "line", and will do by checking for just "li".
110522 -
110523 - Line 2050, ref OF 2 0233, -label nHTml, about 25 lines below, need to
110524 - add code to position cursor to enter anchor ending code after the word
110525 - "line" rather than the number spec, when the link has not been
110526 - converted from the original "line" format.
110527 -
110528 - Line 2080, ref OF 2 3715, -label cnuM, code will enter a link to
110529 - anchor "xx" which will be the Diary date line at the top of the
110530 - record.  This anchor is created today at ref SDS 0 2177.
110531 -
110532 -      ..
110533 -     Corrected Failed Test
110534 -
110535 -     The test at ref SDS 10 6470.
110536 -
110537 -     On record at 940219, ref SDS 2 5626, we get a loop.
110538 -
110539 -     Problem seems to be this record has a cite in the narrative to a
110540 -     ref num for Other Files that does not exist.  The line numbers
110541 -     have not been refreshed in the record, so it is an old record
110542 -     because now line numbers for all records are updated each time
110543 -     they are saved.
110544 -
110545 -     Line 1590, ref OF 2 3787, -label nSDs added code to verify the
110546 -     locate for the ref num lands on a ref line and not in the
110547 -     narrative.
110548 -
110549 -     This will skip linking such erroneous conditions. If it comes up
110550 -     that the link is needed, the record can be investigated and fixed.
110551 -
110552 -
110553 -
1106 -

SUBJECTS
Default 0000 Link to TOF

1204 -
120401 -  ..
120402 - 070405 - Add Default Anchor "0000" at TOF
120403 -
120404 - We want the user to be able to get to the Summary, so we will enter a
120405 - default anchor "0000" in the setup code for a file, and will use
120406 - "0000" for the initial Follow Up line.
120407 -
120408 -
120409 -
120410 -
120411 -
120412 -
1205 -

SUBJECTS
HTML Address for Replying
Post Letterhead Macro for Writing Letters
Email Address for Replying
Comment Reply Email Address

1607 -
160701 -  ..
160702 - 070405  Call 0450431 to Load Return Address in Letterhead
160703 -
160704 - Line 950, ref OF 2 2533, -label 02, about 60 lines below added call to
160705 - macro 0450431 to get the current address for the letterhead.  We will
160706 - start with just the 2 lines of the ASCII code, because this is the
160707 - easiest to figure out.
160708 -
160709 -    [On 980526 modified this to use the regular full address and to
160710 -    include the Internet address. ref SDS 15 0000
160711 -
160712 - Initially, we will "hard wire" the Welch email address for replying,
160713 - but we need to create the ability for 0450431 to load the email
160714 - address that corresponds to the User executing a call to fill out the
160715 - "From" field in the Doc Log system.
160716 -
160717 -
160718 -
160719 -  ..
160720 - 0450431  Created Code to support HTML Conversion
160721 -
160722 - Line 320, ref OF 1 1379, -label AScii this code is used to enter the
160723 - ASCII format of a return address that comes from the Contact record
160724 - created by the Doc Log system.
160725 -
160726 -
160727 -
160728 -
160729 -
160730 -
1608 -

SUBJECTS
Recl - Record Length for # Links on a Line

1704 -
170401 -  ..
170402 -  ..
170403 - 070405 - Change Record Length to 320 for up to 3 Links on a Line
170404 -
170405 - Line 900, ref OF 2 5712, -label 02, about 30 lines below, changed recl
170406 - 300 to recl 360 so we can fit in 3 links on one line. This may solve
170407 - the problem at ref SDS 0 6214.
170408 -
170409 - In the record on IBM's announcement of business intelligence, I
170410 - noticed today that the Web page for it was messed up because 070405
170411 - ran out of line length to enter HTML link reference code.
170412 -
170413 -
170414 -
170415 -
1705 -

SUBJECTS
Subject Description

1804 -
180401 -  ..
180402 - 070405 - Format Subject Descriptions with Times Roman
180403 -
180404 - Follow up ref SDS 6 4250.
180405 -
180406 - Line 1330, ref OF 2 4110, -label spLLT, remove line numbers and change
180407 - to Times Roman for description of Control Field Subjects.  Tried this
180408 - previously at ref SDS 6 4250.  It didn't work because the line
180409 - numbres would not show well in the Web browser with consecutive lines
180410 - coded the way I had them.
180411 -
180412 - By removing the line numers, it seems to work and gives a better
180413 - appearance.
180414 -
180415 -
180416 -
1805 -

SUBJECTS
Indented Headings 4 place nums

1904 -
190401 -  ..
190402 - 070405 - Change Indented Headings to Times Roman
190403 -
190404 - Follow up ref SDS 6 2231.
190405 -
190406 - Line 1360, ref OF 2 6607, -label fiTxt, changed indented headings on
190407 - 4 place line numbers to Times Roman and size 4 with bold.
190408 -
190409 -
190410 -
190411 -
1905 -