CONTACTS 
0201 - Kwan Henmi Arch & Planng           415 626 6766
020101 - Mr. Denis Henmi; Principal

SUBJECTS
Installation, SDS Program
Updates, 930420
Screen Delayed in Reports, under Windows
Transfer Records Between CPUs

0606 -    ..
0607 - Summary/Objective
0608 -
060801 - Installed latest version of SDS ref SDS 3 line 050701.
060802 -
060803 -     Seems to work okay on Denis' computer.
060804 -
060805 - Did not have time to do this testing.  I tested the program before
060806 - leaving for KH's office, and it works on CPU #3 and #7, but I did not
060807 - have time to do this today.
060808 -
060809 - Installed Laplink, but was unsuccessful getting the program to boot
060810 - up.  He does not seem to have a parallel port 1 or 2.  Possibly the
060811 - serial ports will work.
060812 -
060813 - Screen Delay
060814 -
060815 - This is a very serious problem working with the program, because his
060816 - computer is hanging up every time he does a report, or a File List
060817 - function.
060818 -
060819 - Tried calling Microsoft on the screen delay problem, this evening, but
060820 - they are closed after 1700 on West Coast.
060821 -
060822 -      Turns out best solution is to do reports under Windows in Full
060823 -      Screen, alternatively, we can add a switch to smartdrv that
060824 -      writes cache to disk, but that slows down performance.  It is a
060825 -      bug in Windows memory management, that does not exist with OS2.
060826 -
060827 -
060828 -
060829 -
060830 -
0609 -
0610 -
0611 - Problems to fix
0612 -
061201 - Test and configure billing system, per, ref SDS 1 line 050621.
061202 -
061203 - Transfer Project name from Master to Current list.
061204 -
061205 - Transfer records between computers.
061206 -
061207 -    Don't know why this failed today.  I did it several times.  The
061208 -    records do not seem to be out there.  Possibly I got rushed and
061209 -    did not have time to complete transfer, after deleteing all of my
061210 -    9304.. records.
061211 -
061212 -    Could be another manisfestation of hardware problems that have
061213 -    occurred on Denis' computer, ref SDS 4 line 040601.
061214 -
061215 -
0613 -
0614 -

SUBJECTS
SDS Records
Review & Correct SDS records

0705 - Summary/Objective
0706 -
070601 - Downloaded Denis' records and SI, for development of useful stuff.
070602 -
070603 -    Did this so I can do some editing at home.
070604 -
070605 -
070606 - I need now to review and correct his records, as well as set up
070607 - his subject index.
070608 -
070609 -    Today I asked him to set out on his desk the information on the two
070610 -    projects he took calls on today during the training session, which
070611 -    were not in his SI, but which are old projects.  When I come in
070612 -    tomorrow to complete work on his computer configuration, I will
070613 -    load these two projects.
070614 -
070615 -
0707 -
0708 -

SUBJECTS
Terms & Conditions
Welch CM Services
Design Professionals

0906 - Summary/Objective
0907 -
090701 - Review and comment on Denis' SDS memo on this, ref SDS 1 line 110715.
090702 -
090703 -   Dennis had not written anything on this yet.  I reminded him to
090704 -   finish this record, so we can continue discussing the matter.
090705 -
090706 -
090707 -
0908 -
0909 -

SUBJECTS
Kwan Henmi SDS
Develop & Maintain Hardware System
Eliminate Quicken from Windows
Optimize Memory, Config.sys, etc.
Laplink Connection, Parallel port

1208 - Summary/Objective
1209 -
120901 - I am not convinced his machine is working correctly.  The problems
120902 - with transferring SDS records indicates we are not quite there yet.
120903 -
120904 - Began to edit config.sys and autoexec.bat to improve memory
120905 - management, but did not have time to complete.
120906 -
120907 -     He seems to have only about 517K free.
120908 -
120909 - Could not connect Laplink to a parallel port.
120910 -
120911 -
120912 - Need to figure out how to eliminate Quicken from Windows
120913 - applications.
120914 -
120915 -
120916 -
1210 -
1211 -