CONTACTS 

SUBJECTS
Ekiga Computer Software Free Long Distance Telephone Calls Collabora
Elluminate Internet Free Telephone Long Distance Learncentral Educat

1004 -
1004 -    ..
1005 - Summary/Objective
1006 -
100601 - Follow up ref SDS 75 0000. ref SDS 74 0000.
100602 -
100603 -
100604 -
100605 -
100607 -  ..
1007 -
1008 -
1009 - Progress
1010 -
101001 - On 090318 planned to build an ascii file that lists commands for the
101002 - new editor. ref SDS 15 JY33
101004 -         ..
101005 -    1.  beep.................................. 100604, ref SDS 0 CF6I
101006 -    2.  tl.................................... 100604, ref SDS 0 HV9I
101007 -    3.  right................................. 100428, ref SDS 74 W55G
101008 -    4.  left.................................. 100415, ref SDS 74 W55G
101009 -    5.  of.................................... 100415, ref SDS 74 W55G
101010 -    6.  lsfile................................ 100415, ref SDS 71 PS5S
101011 -    7.  scroll bar............................ 100301, ref SDS 66 4C4N
101012 -    8.  pfesc................................. 100224, ref SDS 64 QG6K
101013 -    9.  setcolor.............................. 100108, ref SDS 56 4F3M
101014 -   10.  pfent................................. 091102, ref SDS 51 EZ3I
101015 -   11.  pfb1.................................. 091008, ref SDS 48 4C4N
101016 -   12.  pfb1i................................. 091008, ref SDS 48 4C4N
101017 -   13.  pfb2.................................. 091008, ref SDS 48 4C4N
101018 -   14.  pfb2i................................. 091008, ref SDS 48 4C4N
101019 -   15.  pgup.................................. 090926, ref SDS 47 FW6N
101020 -   16.  pgdn.................................. 090926, ref SDS 47 FW6N
101021 -   17.  ul.................................... 090924, ref SDS 46 JZ4K
101022 -   18.  lr.................................... 090924, ref SDS 46 JZ4K
101023 -   19.  cut................................... 090924, ref SDS 46 JZ4K
101024 -   20.  copy.................................. 090924, ref SDS 46 JZ4K
101025 -   21.  clear................................. 090924, ref SDS 46 JZ4K
101026 -   22.  paste................................. 090924, ref SDS 46 JZ4K
101027 -   23.  insert................................ 090924, ref SDS 46 JZ4K
101028 -   24.  pfd................................... 090924, ref SDS 46 JZ4P
101029 -   25.  pfu................................... 090924, ref SDS 46 JZ4P
101030 -   26.  tab................................... 090924, ref SDS 46 YW9N
101031 -   27.  tab1.................................. 090924, ref SDS 46 YW9N
101032 -   28.  pft................................... 090924, ref SDS 46 YW9N
101033 -   29.  errormsg.............................. 090912, ref SDS 44 5N7J
101034 -   30.  settabs............................... 090912, ref SDS 44 VM4L
101035 -   31.  savx.................................. 090912, ref SDS 44 XT5J
101036 -   32.  strcnt 0 0............................ 090907, ref SDS 41 XT5J
101037 -   33.  compiler.............................. 090715, ref SDS 33 YY6N
101038 -   34.  ioff.................................. 090715, ref SDS 33 0I5J
101039 -   35.  debug nnn............................. 090530, ref SDS 30 OY3H
101040 -   36.  -gosubup.............................. 090529, ref SDS 29 OY3H
101041 -   37.  -gosubdn.............................. 090529, ref SDS 29 OY3H
101042 -   38.  -label................................ 090528, ref SDS 28 OY3H
101043 -   39.  -goto................................. 090528, ref SDS 28 OY3H
101044 -   40.  -gg................................... 090528, ref SDS 28 OY3H
101045 -   41.  -gosub................................ 090528, ref SDS 28 OY3H
101046 -   42.  -return............................... 090528, ref SDS 28 OY3H
101047 -   43.  -exit................................. 090528, ref SDS 28 OY3H
101048 -   44.  -d.................................... 090528, ref SDS 28 OY3H
101049 -   45.  -u.................................... 090528, ref SDS 28 OY3H
101050 -   46.  -if @................................. 090528, ref SDS 28 OY3H
101051 -   47.  join.................................. 090528, ref SDS 28 OY3H
101052 -   48.  split................................. 090528, ref SDS 28 OY3H
101053 -   49.  n<<................................... 090528, ref SDS 28 OY3H
101054 -   50.  n>>................................... 090528, ref SDS 28 OY3H
101055 -   51.  file.................................. 090511, ref SDS 27 HA3L
101056 -   52.  purge................................. 090511, ref SDS 27 HA3L
101057 -   53.  load.................................. 090511, ref SDS 27 HA3L
101058 -   54.  pcmd2................................. 090511, ref SDS 27 HA3L
101059 -   55.  datecnt n 0........................... 090511, ref SDS 27 QX4O
101060 -   56.  rs.................................... 090511  ref SDS 27 HA3L
101061 -   57.  ins_text.............................. 090511, ref SDS 27 HA3L
101062 -   58.  markcur nn............................ 090504, ref SDS 26 HA3L
101063 -   59.  ecur nn............................... 090504, ref SDS 26 HA3L
101064 -   60.  errorcnt 0 0.......................... 090504, ref SDS 26 Q24M
101065 -   61.  aw.................................... 090504, ref SDS 26 HA3L
101066 -   62.  eol................................... 090504, ref SDS 26 HA3L
101067 -   63.  of.................................... 090504, ref SDS 26 HA3L
101068 -   64.  quit.................................. 090504, ref SDS 26 HA3L
101069 -   65.  setgbl................................ 090504, ref SDS 26 HA3L
101070 -   66.  getgbl................................ 090504, ref SDS 26 HA3L
101071 -   67.  gfname................................ 090504, ref SDS 26 HA3L
101072 -   68.  pushc popc............................ 090504, ref SDS 26 HA3L
101073 -   69.  savescr n............................. 090504, ref SDS 26 HA3L
101074 -   70.  linecnt............................... 090430, ref SDS 25 KF9G
101075 -   71.  margin................................ 090430, ref SDS 25 KF9G
101076 -   72.  dos /c................................ 090430, ref SDS 25 XT4F
101077 -   73.  dose /c............................... 090430, ref SDS 25 XT4F
101078 -   74.  dosepath.............................. 090430, ref SDS 25 ET3M
101079 -   75.  fr.................................... 090420, ref SDS 23 HD5J
101080 -   76.  fl.................................... 090420, ref SDS 23 HD5J
101081 -   77.  nb.................................... 090420, ref SDS 23 WE62
101082 -   78.  pfe................................... 090420, ref SDS 23 WE5N
101083 -   79.  l-/    /.............................. 090417, ref SDS 22 H95M
101084 -   80.  zonereps.............................. 090413, ref SDS 20 C946
101085 -   81.  repscnt............................... 090413, ref SDS 20 C946
101086 -   82.  c /xyz/zzz/* *........................ 090408, ref SDS 19 DO45
101087 -   83.  zone.................................. 090331, ref SDS 17 PA54
101088 -   84.  l /     /............................. 090331, ref SDS 17 PA54
101089 -   85.  s /     /............................. 090331, ref SDS 17 PA54
101090 -   86.  pf10.................................. 090331, ref SDS 17 KM9G
101091 -   87.  pa7................................... 090331, ref SDS 17 KM9G
101092 -   88.  immed commands........................ 090320, ref SDS 16 KM9G
101093 -   89.  font.................................. 090131, ref SDS 12 D45G
101094 -   90.  annotate.............................. 090119, ref SDS 10 UI4M
101095 -   91.  color................................. 090119, ref SDS 10 IS6K
101096 -   92.  setcolor.............................. 090119, ref SDS 10 IS6K
101097 -   93.  @filename............................. 090119, ref SDS 10 CB8N
101098 -   94.  setcur 0 0............................ 090119, ref SDS 10 CB8N
101099 -   95.  setcura n 0........................... 090119, ref SDS 10 CB8N
101100 -   96.  inscnt 0 0............................ 090119, ref SDS 10 CB8N
101101 -   97.  medit................................. 090119, ref SDS 10 CB8N
101102 -   98.  e..................................... 090119, ref SDS 10 CB8N
101103 -
101104 -
101105 -
1012 -

SUBJECTS
Default Null Subject Account for Blank Record

1103 -
110401 -  ..
110402 - Planning to work on....
110403 -
110404 -    1.  er ..............(not needed)... ref OF 9 QWTZ
110405 -    2.  repeat n ........(not needed)... ref OF 9 2RSR
110406 -    3.  oo ..............(not needed)... ref OF 9 2RQQ
110407 -    4.  ins_down ........(not needed)... ref OF 9 2RVY
110408 -    5.  recl n...........(not needed)... ref OF 9 2TVS
110409 -    6.  rep_down.........(not needed)... ref OF 9 2XXT
110410 -    7.  ESC <>..........(not needed)... ref OF 9 2TSU
110411 -    8.  savc.............(not needed)... ref OF 9 R47G
110412 -    9.  addtabs..........(not needed)... ref OF 9 2UPW
110413 -   10.  tabs.............(not needed)... ref OF 9 2SYT
110414 -   11.  tabsoff..........(not needed)... ref OF 9 2TPQ
110415 -   12.  notabs...........(not needed)... ref OF 9 2TQV
110416 -   13.  attr........(peculiar to DOS)... ref OF 9 QW6J
110417 -   14.  ragon ragoff.....(not needed)... ref OF 9 QPPP
110418 -   15.  pad1.............(not needed)... ref OF 9 2SVT... ref SDS 53 YN5M
110419 -   16.  nopad............(not needed)... ref OF 9 2SWQ... ref SDS 53 YN5M
110420 -   17.  jj...............(not needed)... ref OF 9 2RXR... ref SDS 53 YN5M
110421 -   18.  jc...............(not needed)... ref OF 9 2SPR... ref SDS 53 YN5M
110422 -   19.  jl...............(not needed)... ref OF 9 2SPX... ref SDS 53 YN5M
110423 -   20.  jr...............(not needed)... ref OF 9 2SQX... ref SDS 53 YN5M
110424 -   21.  space 1......................... ref OF 9 QVQS
110425 -   22.  pfinsw.......................... ref OF 9 4966
110426 -   23.  pfinsw1......................... ref OF 9 4966
110427 -   24.  posmouse........................ ref OF 9 RPVP
110428 -   25.  tm.............................. ref OF 9 RQPP
110429 -   26.  ledger.......................... ref OF 9 QXPR
110430 -   27.  stats........................... ref OF 9 2SWX
110431 -   28.  nostats......................... ref OF 9 2SXX
110432 -   29.  get (g)......................... ref OF 9 RN4K
110433 -
110434 -
110435 -
110436 -
1105 -

SUBJECTS
Computer Remote Control Elluminate Desktop Applications Menu Procedu

2803 -
280401 -  ..
280402 - Elluminate Telephone Conferencing System
280403 -
280404 - Follow up ref SDS 75 TQ6I, ref SDS 74 TQ6I.
280405 -
280406 - On 090907 changed from using Ekiga to Elluminate, ref SDS 41 NI63, for
280407 - no cost long distance telephone conferencing to work on Medit and SDS.
280408 - Elluminate is explained on 090907 1132. ref SDS 42 YM5L
280410 -  ..
280411 - The record on 090907 1132 explains Elluminate. ref SDS 42 YM5L
280413 -  ..
280414 - Remote control instructions are on 100224 0814. ref SDS 64 TQ6I
280416 -  ..
280417 - Used Eluminate today for conference call to work from home today,
280418 - rather than visit Morris in Saratoga.
280420 -  ..
280421 - Morris reported today that the access URL can be recycled for
280422 - subsequent uses.
280423 -
280431 -
280432 -
280433 -
280434 -
280435 -
2805 -

SUBJECTS
Default Null Subject Account for Blank Record

2903 -
290401 -  ..
290402 - Compiler Progress Toward Beginning Testing @ Command Must with Number
290403 - Compiled Macros @ Commands Change 1st Char from Number to Letter
290404 -
290405 - Follow up ref SDS 75 263K, ref SDS 74 263K.
290406 -
290407 - Morris started work on the compiler reported in the record for, 090715
290408 - 0809, ref SDS 33 YY6N
290410 -  ..
290411 - There are continuing issues with the compiler that Morris fixes as
290412 - they occur using various commands.
290413 -
290415 -  ..
290416 - TL Command for Title Lines
290417 -
290418 - Morris reported that he created this command over the past few weeks.
290419 -
290420 - Title lines
290421 -
290422 -        tl.............................. ref OF 9 TSTY
290424 -  ..
290425 - Testing shows this is not working quite correctly.
290427 -  ..
290428 - Morris programmed the new tl command to create new lines between file
290429 - line 1 and the filename message line, screen line 2.
290431 -  ..
290432 - We did some experiments showing with original Medit how the command
290433 - should work.
290434 -
290435 -            [On 100618 0927 Morris fixed tl command. ref SDS 76 HV9I
290436 -
290437 -            [On 100901 1645 Morris fixed another tl command problem of
290438 -            failing when screen is offset. ref SDS 78 HV9I
290440 -             ..
290441 -            [On 100901 1645 Morris wanted to keep tl command preventing
290442 -            reading or even allowing data entry.  It can be solved by
290443 -            turning tl off, which already done a lot, ref SDS 78 BF5L,
290444 -            so solved problem reported on 100901 0824. ref SDS 77 VE6L
290445 -
290446 -
290447 -
290448 -
290449 -
290450 -
290452 -  ..
290453 - Cut & Paste Macro 46 UL Cursor Not Holding Position
290454 - Macro 46 UL Cursor Not Holding Position Cut & Paste
290455 - Cursor Not Holding Position Cut & Paste Macro 46 UL
290456 - UL Cursor Not Holding Position Cut & Paste Macro 46
290457 -
290458 - Follow up ref SDS 75 UU8M.
290459 -
290460 - See problem report calling UL with macro 46 shwon in the record on
290461 - 090924 0804. ref SDS 46 F55N
290463 -  ..
290464 - Demonstrated this problem again looking at macro 46 code in 000001,
290465 - shown on 090924 0804. ref SDS 46 F55N
290467 -  ..
290468 - Morris investigating again was sidetracked by architecture issue
290469 - reported during prior session on 100506 1000. ref SDS 75 UU8M
290471 -  ..
290472 - Morris fixed problem of cursor moving with UL command when pf5 calls
290473 - macro 46.
290475 -  ..
290476 - There is still a problem with errormsg created in cut file to post in
290477 - the target file.
290479 -  ..
290480 - Morris fixed this by making messages global for for errormsg commands.
290481 -
290483 -  ..
290484 - Beep Command
290485 -
290486 - Morris created a beep command.  He indicates it only works in
290487 - Microsoft Windows, and not in Unix.
290488 -
290489 -
290490 -
290491 -
290492 -
290493 -
2905 -

SUBJECTS
Default Null Subject Account for Blank Record

3003 -
300401 -  ..
300402 - Debug Refinements Enable Continual Processing
300403 -
300404 - Follow up ref SDS 75 SC4H, ref SDS 74 SC4H.
300405 -
300406 - Pending improvements listed on 100210 1019. ref SDS 62 SC4H
300407 -
300408 -
300409 -
300410 -
3005 -

SUBJECTS
SDS Java Development Directory Structure SD 30 Directory Structure

3703 -
370401 -  ..
370402 - Java SDS Macro Development Files Structure
370403 - File Structure SDS Java Macro Development
370404 -
370405 - Follow up ref SDS 75 I29I, ref SDS 74 I29I.
370406 -
370407 - Changed the directory structure for the new SDS Java development
370408 - program, reported on 100415 0815. ref SDS 71 RA6N
370409 -
370410 -
370411 -
370412 -
3705 -

SUBJECTS
Medit Java Macro Development Compression 011 Convert SD 03 0011 Supp

4703 -
470401 -  ..
470402 - 011 Macro Compression Modify for New SDS Java Development 01 DV
470403 - Macro Compression 01 DV 011 Modify for New SDS Java Development
470404 - F1 Tab Macro Compression 01 DV 011 Modify for New SDS Java Development
470405 -
470406 - Follow up ref SDS 75 EO3K, ref SDS 74 EO3K.
470407 -
470408 - On 100415 changed macro file compression processors for original
470409 - Medit, and the new Java version to both compile macros for the
470410 - original and new versions of Medit. ref SDS 71 EO3K
470412 -  ..
470413 - On 100506 Morris fixed locate command problem not processing the
470414 - entire search string. ref SDS 75 0P8G
470416 -  ..
470417 - Trying to test 011 macro file compression by running on...
470418 -
470419 -                     c: 01 14 0140.
470420 -
470421 -
470423 -  ..
470424 - E Command Problems Returning Error Message for File Aready Open
470425 -
470426 - Follow up ref SDS 75 LM7N.
470428 -  ..
470429 - Line 1360, ref OF 6 DU8F, -label aFrMv_lbs in 01 14 0110
470430 -
470431 -    -label aFrMv_lbs
470432 -
470433 -        Trying debug here.
470435 -  ..
470436 - Line 1410, ref OF 6 WY6J, -label aFAdj_lIn in c: 01 14 0110
470437 -
470438 -    e nvq
470439 -
470440 -        This command returns error message...
470441 -
470442 -            File Not Found nvq (The system cannot find the file specified)
470443 -
470444 -        ...even though the file is already opened and has content.
470445 -
470447 -  ..
470448 - Line 1460, ref OF 6 CZ6O, -label aFAdj_lIn in c: 01 14 0110 about 30 lines below
470449 -
470450 -    macro 1181
470451 -
470452 -        This command fails to enter the string, even though the
470453 -        counters appear to be correct.
470455 -  ..
470456 - Morris fixed this problem.  He explained that the error message occurs
470457 - because the e command attempts to first open the file from the disk,
470458 - and it does not exist.  Therefore Medit Java returns an error message.
470460 -  ..
470461 - Processing was stopping, Morris coded the error message for this
470462 - situation to be entered on column 1, and so processing stopped.
470464 -  ..
470465 - Morris changed the code today so the error message starts on column 2,
470466 - which is the scheme in original Medit.  Morris also changed the
470467 - message from the above string, ref SDS 75 HG83, to simply...
470468 -
470469 -            Editing a new file
470471 -  ..
470472 - After changing the code to enter the error message on column 2,
470473 - processing was successful at this stage.
470475 -  ..
470476 - There is another concern....
470478 -  ..
470479 - Medit does not return an error message if the file is already in
470480 - memory, suggesting, that rather than first checking the disk for a
470481 - file, the code first checks memory, and if so the file is opened
470482 - without an error message, and if not, then the code checks the disk,
470483 - and if no file is found, the code opens a new file that is empty with
470484 - the message...
470485 -
470486 -            Editing a new file
470488 -  ..
470489 - Morris said today that the new Java Medit program first looks for a
470490 - file in memory, and if not found, then checks the disk, as the
470491 - original Medit does.  This should resolve issue on 100506 1000.
470492 - ref SDS 75 YS62
470493 -
470494 -
470496 -  ..
470497 - Ins_text Command Shifting Text 1 Column Left
470498 - Redirection Processing Mysteriously Shifts Corrupting Change Command
470499 -
470500 - Follow up ref SDS 75 TZ3L.
470502 -  ..
470503 - Line 300, ref OF 6 VM5M, -label okgO in c: 01 14 0110
470504 -
470505 -    of 77
470506 -    loc_cur 0 1
470507 -    ic 94
470508 -
470509 -        This code offsets the screen and enters a control character in
470510 -        column 78, which is used manage converting redirection commands
470511 -        into -u and -dn commands.
470512 -
470514 -  ..
470515 - Line 1620, ref OF 6 T16N, -label aFend_1 in c: 01 14 0110
470516 -
470517 -    z 78 79
470518 -    c/^t/  /* 1
470519 -    c/^s/  /* 1
470520 -    c/^ /  /* 1
470521 -
470522 -        This code removes the temporary control characters entered
470523 -        above, and after all of the processing has been completed.
470525 -         ..
470526 -        The problem is that after everything has been processed the
470527 -        data entered in column 78 is somehow shifted to column 77, so
470528 -        processing fails.
470530 -  ..
470531 - Testing shows problem with ins_text command shift text.
470533 -  ..
470534 - Line 670, ref OF 6 RZ8M, -label aFGoTo+ in c: 01 14 0110
470535 -
470536 -    -label aFGoTo+
470537 -    ins_text "-u                "
470538 -    rel_cur 0 3
470539 -
470540 -        Testing shows that ins_text command entered on column 14 is
470541 -        shifting the text left 1 column on column 78, so it winds up
470542 -        on column 77.
470544 -  ..
470545 - On 090511, Morris developed ins_text command, ref SDS 27 HA3L, and on
470546 - 100428 he modified ins_text command. ref SDS 74 263K
470548 -  ..
470549 - Not clear why ins_text should shift data, since it should be an
470550 - "overlay" procedure.
470551 -
470552 -        [On 100618 0927 Morris fixed ins_text command. ref SDS 76 TZ3L
470553 -
470554 -
470555 -
470556 -
4706 -

SUBJECTS
Default Null Subject Account for Blank Record

4803 -
480401 -  ..
480402 - Windows Cut Paste Utility in Medit from Menu Line
480403 -
480404 - Follow up ref SDS 75 244F.
480405 -
480406 - Currently, Medit in MS DOS provides Windows cut and paste support
480407 - from icon in top left corner.
480409 -  ..
480410 - Would be helpful to provide this support either from icon or the menu
480411 - line in Medit Java.
480412 -
480413 -
480414 -
480415 -
480416 -
480417 -
480418 -
480419 -
4805 -

SUBJECTS
Default Null Subject Account for Blank Record

4903 -
490401 -  ..
490402 - Locate Command Requires Refinement Start Below Current Line
490403 -
490404 - Follow up ref SDS 75 2R6O, ref SDS 74 2R6O.
490405 -
490406 -
490407 -
490408 -
490409 -
4905 -

SUBJECTS
Default Null Subject Account for Blank Record

5003 -
500401 -  ..
500402 - Immed Commands Not Executing on Top of File Line
500403 -
500404 - Follow up ref SDS 75 1L8O.
500405 -
500406 - After fixing the locate command, we ran 011 again, and discovered
500407 - that...
500409 -  ..
500410 - Line 1620, ref OF 6 7027, -label aFquit in 01 14 0110 about 50 lines below
500411 -
500412 -    e nvq
500413 -    macro 301
500414 -    immed a
500415 -    ins_text"macro 3"
500416 -    rel_cur 1 0
500417 -    ic 103
500418 -    rel_cur 0 1
500419 -    setcnt 86 1
500420 -    macro 1181
500421 -
500422 -        Macro 301 crashes calling macro 3.  This is about where the
500423 -        crash occurs, however macro 301 is used many times before
500424 -        getting to this point.
500426 -  ..
500427 - Line 1620, ref OF 15 OP6I, -entry 3 in c: sd 33 000000
500428 -
500429 -    -entry 3
500430 -    top
500431 -    immed 9999d
500432 -    -exit
500433 -
500434 -        Debugging in Netbeans indicates that immed 9999d returns error
500435 -        message on top of file, after emptying the file.
500437 -  ..
500438 - New problem is that macro 150 now causes top of file line to appear,
500439 - and it should not be doing this.
500441 -  ..
500442 - Morris did more work, and testing seems to show this problem is now
500443 - fixed.
500444 -
500445 -
500447 -  ..
500448 - Macro 150 Top of File Line Should Not be Visible on Screen
500449 -
500450 - Follow up ref SDS 75 RN9O.
500452 -  ..
500453 - Line 70, ref OF 20 JW8I, -entry 150 in sd 33 000008
500454 -
500455 -    -entry 150
500456 -
500457 -        Trying debug here to see why top of file line is shown after
500458 -        macro 150 processes.
500460 -     ..
500461 -    macro 151
500462 -
500463 -        If debug is called at this point, the whole thing runs
500464 -        correctly.
500465 -
500466 -
500468 -  ..
500469 - Line 230, ref OF 20 3J4K, -entry 151 in sd 33 000008
500470 -
500471 -    -entry 151
500472 -
500473 -    immed 17a
500474 -    top
500475 -
500476 -        Trying debug here to see why top of file line is shown after
500477 -        macro 150 processes.
500479 -         ..
500480 -        If debug is called before 151, the code fails in compiled
500481 -        mode; but, if debug is called after -entry, the code runs in
500482 -        macro file mode correctly.  This indicates possible problem
500483 -        with the compiler.
500485 -         ..
500486 -        Appears that top command does not execute with cursor on top
500487 -        of file line in compiled macro.
500489 -         ..
500490 -        Might relate to work on scroll bar problem, per above,
500491 -        ref SDS 75 X27F,
500493 -  ..
500494 - Morris feels this is caused by changes to scroll bar code developed
500495 - today per above. ref SDS 75 X27F
500496 -
500497 -
500499 -  ..
500500 - Line 220, ref OF 20 HZ3K, -entry 151 in sd 33 000008
500501 -
500502 -    -exit
500503 -
500504 -        When this "-exit" command executes in macro file "debug" mode,
500505 -        control does not return to macro 150 and continue processing in
500506 -        as it seems to do in compiled macro mode. ref SDS 75 J24I
500507 -
500508 -
500510 -  ..
500511 - Line 240, ref OF 20 LX3O, -entry 153 in sd 33 000008
500512 -
500513 -    -entry 153
500514 -
500515 -        Trying debug here to see why top of file line is shown after
500516 -        macro 150 processes.
500517 -
500519 -  ..
500520 - Line 480, ref OF 20 0494, -entry 153 in sd 33 000008 about 100 lines below
500521 -
500522 -    pfinsw macro 341
500523 -    pfinsw1 macro 49
500524 -
500525 -        These commands are returning error message and turning off
500526 -        debug op, because they do not yet exist, per above. ref SDS 75
500527 -        UZ3I
500529 -         ..
500530 -        Temporarily disconnected to evaluate macro 150 problem, per
500531 -        above. ref SDS 75 RN9O
500532 -
500533 -
500534 -
500535 -
500536 -
5006 -

SUBJECTS
Default Null Subject Account for Blank Record

5103 -
510401 -  ..
510402 - Enter 000008 Macro Access
510403 - 000008 Macro Access Enter
510404 -
510405 - Follow up ref SDS 75 XO7N, ref SDS 74 XO7N.
510406 -
510407 -
510408 -
510409 -
5105 -

SUBJECTS
Default Null Subject Account for Blank Record

5203 -
520401 -  ..
520402 - 0605 Compiled Code Fails Opening Macros to Code Line Entry 136
520403 - Compiled Code Fails Opening Macros to Code Line Entry 136 and 0605
520404 -
520405 - Follow up ref SDS 75 JK8M, ref SDS 74 JK8M.
520406 -
520407 - Another problem is opening macros with Enter key, reported on 100428
520408 - 1128. ref SDS 74 JK8M
520409 -
520410 -
520411 -
520412 -
520413 -
5205 -

SUBJECTS
Default Null Subject Account for Blank Record

5303 -
530401 -  ..
530402 - Setcura Needs Variable to Recognize Quit=ESC Annotate Field
530403 -
530404 - Follow up ref SDS 75 AV7O, ref SDS 74 AV7O.
530405 -
530406 - Planning for sectura command using mouse, reported on 100208 0907.
530407 - ref SDS 61 AV7O
530408 -
530409 -
530410 -
5305 -

SUBJECTS
Default Null Subject Account for Blank Record

5403 -
540401 -  ..
540402 - Mouse Commands Left and Right
540403 -
540404 - Follow up ref SDS 75 4C4N, ref SDS 74 4C4N.
540405 -
540406 - Planning for scroll bar considered on 100210. ref SDS 62 BY3H
540408 -  ..
540409 - Line 340, ref OF 16 4473, -entry 230 in 000001
540410 -
540411 -    -entry 230
540412 -
540413 -        Testing mouse code here with debug.
540415 -  ..
540416 - On 100301 Morris made progress creating scroll bar feature.  The
540417 - current version now has a vertical scroll bar.  Decided to forego
540418 - horizontal scroll bar for now. ref SDS 66 VU4N
540419 -
540420 -
540421 -
5405 -

SUBJECTS
Default Null Subject Account for Blank Record

5503 -
550401 -  ..
550402 - Scroll Bar Navigate File Replace Mouse on Column 80
550403 -
550404 - Follow up ref SDS 75 MV5I, ref SDS 74 MV5I.
550405 -
550406 - Would like scroll bar to track the size of the file somewhat, similar
550407 - to other windows applications.  Alternatively, make the scroll bar
550408 - slightly bigger so it is easier to touch with the mouse, reported on
550409 - 100428 1128. ref SDS 74 TD6H
550410 -
550411 -
550412 -
550413 -
550414 -
550415 -
5505 -

SUBJECTS
Default Null Subject Account for Blank Record

5603 -
560401 -  ..
560402 - Menu Convert SDS Records HTML Transfer to Internet
560403 -
560404 - Follow up ref SDS 75 J23L, ref SDS 74 J23L.
560405 -
560406 - Solution to "sectura" problem above applied with mouse, ref SDS 62
560407 - AV7O, clicking on the Command line above the Annotate field, beginning
560408 - with Quit=ESC, etc., for calling Internet formatting and uploading
560409 - functions, needs to be changed and moved to the new Field above the
560410 - Medit screen where there is currently a menu with File and Help.
560412 -  ..
560413 - On 100211 0930 letter to Morris asks about applying the new menu field
560414 - above the Medit screen to perform HTML formatting, and transfer to the
560415 - Internet. ref SDS 63 KR8W
560416 -
560417 -
560418 -
560419 -
560420 -
560421 -
5605 -

SUBJECTS
Default Null Subject Account for Blank Record

5703 -
570401 -  ..
570402 - File Management Macro 58 F1 F3 Failing Apply Line Draw
570403 -
570404 - Follow up ref SDS 75 EY6I, ref SDS 74 EY6I.
570405 -
570406 - Problem running macro 145 in c: 01 14 06080, reported on 100506 1000.
570407 - ref SDS 75 EY6I
570408 -
570409 -
570410 -
570412 -  ..
570413 - Lsfile Command Issues
570414 -
570415 - Follow up ref SDS 75 PS5S, ref SDS 74 PS5S.
570416 -
570417 - Modify 0608 to apply lsfile feature for file management, per record on
570418 - 100428 1128. ref SDS 74 B677
570419 -
570420 -
570421 -
570422 -
5705 -

SUBJECTS
Default Null Subject Account for Blank Record

5803 -
580401 -  ..
580402 - Menu Macro 80 Not Running Correctly
580403 -
580404 - Follow up ref SDS 75 FG6F, ref SDS 74 FG6F.
580406 -  ..
580407 - Line 180, ref OF 18 8E3H, -entry 80 in 000003
580408 -
580409 -    ioff
580410 -    tl 0
580411 -
580412 -        These commands are not yet programmed, so unplug for testing.
580414 -         ..
580415 -        Getting Java compile error with * to unplug commands in
580416 -        compiled macros.  * works okay in macro files.  Was getting
580417 -        "missing "-return" command.
580419 -         ..
580420 -        When * removed from ioff command, the program compiled without
580421 -        errors.
580423 -  ..
580424 - This is difficult to fix.  It is easy enough to use blanks instead of
580425 - "*" in compiled macros.  No real need for commenting in compiled
580426 - macros wtih "*".
580427 -
580428 -
580430 -  ..
580431 - Line 270, ref OF 18 PG9M, -entry 806 in 000003
580432 -
580433 -    -entry 806
580434 -
580435 -        This is where the error is occurring.
580436 -
580437 -        It is part of the menu command that saves the visible screen
580438 -        to restore after menu ops.
580439 -
580440 -
5805 -

SUBJECTS
Default Null Subject Account for Blank Record

5903 -
590401 -  ..
590402 - Stats Feature
590403 -
590404 - Follow up ref SDS 75 QW9I, ref SDS 74 QW9I.
590405 -
590406 - On 100428 1133 Morris made changes that improve stats field; still
590407 - needs work for better ergonomics. ref SDS 74 QW9I
590409 -  ..
590410 - Still need stats and nostats commands.
590411 -
590412 -
590413 -
590414 -
5905 -

SUBJECTS
Default Null Subject Account for Blank Record

6003 -
600401 -  ..
600402 - DOS DOS /C DOSE DOSE /C
600403 -
600404 - Follow up ref SDS 75 MR8I, ref SDS 74 MR8I.
600405 -
600406 - Need these two commands to do the same thing.
600407 -
600408 -        dos /c.......................... ref OF 9 2QTS
600409 -        dose /c......(same as dos /c)... ref OF 9 QXUR
600411 -  ..
600412 - These are needed to launch SDS, and begin testing functionality.
600414 -  ..
600415 - Morris initially said this feature cannot be accomplished with Java.
600417 -  ..
600418 - Actually, Morris did much of this work on 090430 0700. ref SDS 25 XT4F
600420 -  ..
600421 - Explanation on dose command to launch batch file is on 090430 0700.
600422 - ref SDS 25 XB9G
600424 -  ..
600425 - Line 220, ref OF 20 LX3O, -entry 153 in 000008
600426 -
600427 -    -entry 153
600428 -    dospath i:\windows\system32\cmd.exe /C start
600429 -
600430 -        Added dospath command to Java Medit - needs experimentation to
600431 -        run correctly.
600433 -  ..
600434 - Need to experiement to see how this works with dospath command in
600435 - profile.
600436 -
600438 -  ..
600439 - Launch SDS
600440 -
600441 - Follow up ref SDS 75 LV4G, ref SDS 74 LV4G.
600442 -
600443 - Temporarily put commands for launching SDS with new Java Medit in...
600445 -  ..
600446 - Line 200, ref OF 22 GO5G, in c: sd 61 sds.cmd
600447 -
600448 -    java -jar "C:\sd\60\NetBeansProjects\jedit\dist\jedit.jar" messages C:\SD\03\04702
600449 -
600450 -        This still does not work because Java Medit cannot open a file
600451 -        from the DOS prompt, and so cannot call a profile, as explained
600452 -        on 090430 0700. ref SDS 25 XB9G
600453 -
600455 -  ..
600456 - Medit Java Version Launch
600457 -
600458 - Follow up ref SDS 75 CQ6L, ref SDS 74 CQ6L.
600459 -
600460 -
600461 - Line 200, ref OF 21 EM7I, in c: sd 61 MJ.CMD
600462 -
600463 -
600464 -
600465 -
600466 -
600467 -
6005 -

SUBJECTS
Java Netbeans 6.8 Upgrade Installed C16 Windows XP 32-bit Replacing

6903 -
690401 -  ..
690402 - Java Netbeans 6.8 Installed on C16
690403 -
690404 - Follow up ref SDS 75 Y38J, ref SDS 74 Y38J.
690405 -
690406 - On 100115 0717 installation on c16 of updated Java Netbeans 6.8 code
690407 - was performed. ref SDS 57 Y38J
690408 -
690409 -
690410 -
690411 -
690412 -
690413 -
690414 -
6905 -

SUBJECTS
Default Null Subject Account for Blank Record

7003 -
700401 -  ..
700402 - Next Meeting to Work on SDS
700403 -
700404 - Follow up ref SDS 75 OC77, ref SDS 74 OC77.
700405 -
700406 - Plan to do more work on Wednesday, 100303.
700407 -
700408 -
700409 -
700410 -
700411 -
700412 -
7005 -