Gensler/Michael Willis/Kwan Henmi

600 California Street, Floor 1100

San Francisco, CA  94108

415. 433. 3700




Memorandum

To:     Ivan Romero

From:   Clonia Cautis

Date:   October 5, 1998

Subject:  To do list
                 Interior elevations



I briefly reviewed the 25% progress prints interior elevations provided
10/30/98. Please find attached a sample of the new interior elevations.


Between the DD set dated 5/15/98 and the Progress set dated 9/30/98 I can only
see missing information: finishes disappeared, so did some of the structural
elements.


The intent of the interior elevations (previous discussion with you, when I
asked you to take a look at the Moscone II set), sections is to indicate the
elements that need to be constructed within the interstitial ceiling space,
walls, etc. the "progress" elevation does not deal at all with this, although
the elements were well known to the team (structural, HVAC, floor boxes, etc
drawings)  Also we do need a blow up partial elevation at ¬" scale.


When are they going to be started?


As I mentioned to you before, you can provide drafted by hand drawings. Not all
drafting needs to be done on CADD.


It will be probably a good idea if a senior person drafts the ¬" blow up with
all the necessary, coordinated information, then a junior/ CADD draftsperson
can input it on the overall elevation/ section.












Cc: Steven Hergert




pc g:\arch\managers\cautisc\moscone\2-designarch Gensler\memo-27.doc